Great tool for laying floor/wall tiles. It is suitable for tiles with a thickness of 3mm-18mm, and suitable for tiles with a gap of ≥2mm
The new leveling system keeps the tiles at the same level, preventing them from shifting as they dry
The tile leveling system is reusable, durable and wear-resistant. It is very easy to install or remove using a special wrench
Easy to use, increases the speed of tile installation and reduces the need for grinding and polishing, making flat tiles look perfect
Specifications:
Cross: 1.0mm
Applicable: seamless tiles, to polish tiles
Applicable brick difference: >1.5mm
Usage Tips:
Lay the first tile, leaving more than 2mm. Close to tile.
Insert T-pins next to the gap between the tiles. Then rotate 90 degrees and the T-needle is attached to the bottom of the two tiles. Adjust the cover by hand / wrench until the two tiles are on the same level.
After leveling for about 5-6 hours, before the cement / adhesive is completely dry, rotate the lid in reverse and take off the 180 degree T needle.
No Need To Remove the T-leveling Tile System:
1. Ceramic tile joints are 2mm or more (cross joints are recommended)
2. When leveling, adhesive cement or tile cement around T-type leveler should be cleaned.
3. Remove the T-type straightener about 5-6 hours after leveling before the tile or cement binder is completely dried.