HUD can auto adapt to vehicle type which in line with OBDII or EUOBD (On-Board Diagnostic System)
HUD can display many parameters at the same time, such as speed, engine speed, water temperature, battery voltage, fuel consumption, low voltage alarm, high temperature alarm, speed alarm, free switching between kilometer and mile, free switching between °F and °C
Multi-color design makes the screen more abundant and easier to read
The display area is 3.0 inches which is very clear for driver to read data
Auto power on and off with vehicle started and shutdown, effective protection of the car battery; while retaining the manual switch mode, and more easy to control HUD
Automatic and manual brightness adjustment mode, driving without glare
Notice 1: Open the engine hood and find the paster below it (see the picture below), if it has words like OBD II CERTIFIED, then it can be installed. You should affixed the paster in the HUD display area, it can refrain strong light, brings better display effects when HUD working.
Notice 2: Know the type of your vehicle. When purchasing HUD, you need to choose the type of vehicle that meets the OBD II standards for normal use. Any US Vehicle 2004 or later will have an OBD2 port to use with the display. Outside the United States vehicle after 2008 will have an OBD2 port to use with the display.
Specifications:
Screen: 3 inch
Environment temperature: -40 degree centigrade ~ +80 degree centigrade
Barometric press: 86-106KPa
Relative humidity: 10%-95%
Ambient noise: ≤60dB
Alarm of sound level: ≥30dB(A)
Work voltage: 9V~16Vdc (12Vdc/400mA)
HUD size: 90 x 54 x 12mm